R3204P16-HP Load Balancing Module Security Command Reference-6PW101

8
View
User view
Default level
2: System level
Parameters
acl-number: Specifies an IPv4 ACL by its number:
• 2000 to 2999 for IPv4 basic ACLs
• 3000 to 3999 for IPv4 advanced ACLs
• 4000 to 4999 for Ethernet frame header ACLs
all: Clears statistics for all IPv4 ACLs.
name acl-name: Specifies an IPv4 ACL by its name. The acl-name argument takes a case insensitive
string of 1 to 32 characters. It must start with an English letter.
Description
Use the reset acl counter command to clear statistics for the specified IPv4 ACL or all IPv4 ACLs.
Related commands: display acl.
Examples
# Clear statistics for IPv4 basic ACL 2001.
<Sysname> reset acl counter 2001
# Clear statistics for IPv4 ACL flow.
<Sysname> reset acl counter name flow
rule (Ethernet frame header ACL view)
Syntax
rule [ rule-id ] { deny | permit } [ cos vlan-pri | counting | dest-mac dest-addr dest-mask | { lsap lsap-type
lsap-type-mask | type protocol-type protocol-type-mask } | source-mac sour-addr source-mask |
time-range time-range-name ] *
undo rule rule-id [ counting | time-range ] *
View
Ethernet frame header ACL view
Default level
2: System level
Parameters
rule-id: Specifies a rule ID, which ranges from 0 to 65534. If no rule ID is provided when you create an
ACL rule, the system automatically assigns it a rule ID. This rule ID takes the nearest higher multiple of the
numbering step to the current highest rule ID, starting from 0. For example, if the rule numbering step is
5 and the current highest rule ID is 28, the rule is numbered 30.
deny: Denies matching packets.
permit: Allows matching packets to pass.