R3204P16-HP Load Balancing Module Security Command Reference-6PW101

75
If you specify the ucibindex ucib-index combination, the command displays detailed information;
otherwise, the command displays brief information.
This command does not apply to FTP user connections.
Related commands: cut connection.
Examples
# Display information about all AAA user connections.
<Sysname> display connection
Index=1 ,Username=telnet@system
IP=10.0.0.1
Total 1 connection(s) matched.
# Display information about AAA user connections using the index of 0.
<Sysname> display connection ucibindex 0
Index=0 , Username=telnet@system
IP=10.0.0.1
Access=Admin ,AuthMethod=PAP
Port Type=Virtual ,Port Name=N/A
Initial VLAN=999, Authorization VLAN=N/A
ACL Group=Disable
User Profile=N/A
CAR=Disable
Priority=Disable
Start=2009-07-16 10:53:03 ,Current=2009-07-16 10:57:06 ,Online=00h04m03s
Total 1 connection matched.
Table 17 Output description
Field Descri
p
tion
Username Username of the connection, in the format username@domain
IP IPv4 address of the user
Access User access type
ACL Group Authorization ACL group. Disable means no authorization ACL group is assigned.
User Profile Authorization user profile
CAR(kbps) Authorized CAR parameters
UpPeakRate Uplink peak rate
DnPeakRate Downlink peak rate
UpAverageRate Uplink average rate
DnAverageRate Downlink average rate
display domain
Syntax
display domain [ isp-name ]