R3204P16-HP Load Balancing Module Security Command Reference-6PW101

77
Field Descri
p
tion
State Status of the domain (active or block)
Access-limit Limit on the number of user connections
Accounting method Accounting method (either required or optional)
Default authentication scheme Default authentication method
Default authorization scheme Default authorization method
Default accounting scheme Default accounting method
Domain User Template Template for users in the domain
Idle-cut Whether idle cut is enabled
Self-service Whether self service is enabled
User-profile Default authorization user profile
display local-user
Syntax
display local-user [ service-type { ftp | ssh | telnet | terminal } | state { active | block } | user-name
user-name ]
View
Any view
Default level
1: Monitor level
Parameters
service-type: Specifies the local users of a type.
• ftp refers to users using FTP.
• ssh refers to users using SSH.
• telnet refers to users using Telnet.
• terminal refers to users logging in through the console port.
state { active | block }: Specifies all local users in the state of active or block. A local user in the state of
active can access network services, while a local user in the state of blocked cannot.
user-name user-name: Specifies all local users using the specified username. The username is a
case-sensitive string of 1 to 55 characters and does not contain the domain name.
Description
Use the display local-user command to display information about specified or all local users.
Related commands: local-user.
Examples
# Display information about all local users.
<Sysname> display local-user
The contents of local user 1:
State: Active