R3204P16-HP Load Balancing Module Security Command Reference-6PW101

83
Default level
3: Manage level
Parameters
user-name: Name for the local user, a case-sensitive string of 1 to 55 characters that does not contain the
domain name. It cannot contain any backward slash (\), forward slash (/), vertical line (|), colon (:),
asterisk (*), question mark (?), less-than sign (<), greater-than sign (>) and the @ sign and cannot be a,
al, or all.
all: Specifies all users.
service-type: Specifies the users of a type.
• ftp refers to users using FTP.
• ssh refers to users using SSH.
• telnet refers to users using Telnet.
• terminal refers to users logging in through the console port.
Description
Use the local-user command to add a local user and enter local user view.
Use the undo local-user command to remove the specified local users.
By default, no local user is configured.
Related commands: display local-user and service-type.
Examples
# Add a local user named user1.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1]
local-user password-display-mode
Syntax
local-user password-display-mode { auto | cipher-force }
undo local-user password-display-mode
View
System view
Default level
2: System level
Parameters
auto: Displays the password of a user based on the configuration of the user by using the password
command.
cipher-force: Displays the passwords of all users in cipher text.
Description
Use the local-user password-display-mode command to set the password display mode for all local
users.