R3204P16-HP Load Balancing Module Security Command Reference-6PW101

90
Default level
2: System level
Parameters
seconds: Time interval to retransmit accounting-on packet in seconds, ranging from 1 to 15.
Description
Use the accounting-on enable interval command to configure the retransmission interval of
accounting-on packets.
Use the undo accounting-on enable interval command to restore the default.
By default, the retransmission interval of accounting-on packets is 3 seconds.
Execution of this command does not affect the results of other accounting-on related commands such as
accounting-on enable. That is, execution of the undo accounting-on enable interval command will not
disable the accounting-on feature.
The retransmission interval configured with this command takes effect immediately.
Related commands: radius scheme and accounting-on enable.
Examples
# In RADIUS scheme rd, set the retransmission interval of accounting-on packet to 5 seconds.
<Sysname> system-view
[Sysname] radius scheme rd
[Sysname-radius-rd] accounting-on enable interval 5
accounting-on enable send
Syntax
accounting-on enable send send-times
undo accounting-on send
View
RADIUS scheme view
Default level
2: System level
Parameters
send-times: Maximum number of accounting-on packet transmission attempts, ranging from 1 to 255.
Description
Use the accounting-on enable send command to set the maximum number of accounting-on packet
transmission attempts.
Use the undo accounting-on enable send command to restore the default.
By default, the maximum number of accounting-on packet transmission attempts is 5.
Execution of this command does not affect the results of other accounting-on related commands such as
accounting-on enable. That is, execution of the undo accounting-on enable interval command will not
disable the accounting-on feature.