R3204P16-HP Load Balancing Module Security Configuration Guide-6PW101

2
Figure 1 Zone classification
Configuring a zone
Configuration task list
Perform the tasks in Table 1 to configure a zone.
Table 1 Zone configuration task list
Task Remarks
Creating a zone
Optional
By default, the following zones are available on the device: Management,
Local, Trust, DMZ and Untrust.
Configuring a zone member
Required
Add specified subnet address source, interfaces, Layer 2 Ethernet interface
+ VLAN to the created zone.
Creating a zone
Select Security > Zone from the navigation tree to enter the page as shown in Figure 2. Click Add to enter
the page for creating a zone, as shown in Figure 3.