R3204P16-HP Load Balancing Module Security Configuration Guide-6PW101

4
Figure 4 Modify zone
Table 3 Configuration items for modifying a zone
Item Descri
p
tion
Zone ID Displays the zone ID.
Zone Name Displays the zone name.
Preference
Set the preference of the specified zone
By default, packets from a high priority zone to a low priority zone are allowed to pass.
Interface
Interface
Set the interfaces to be added to the zone.
The interfaces that have been added to a zone are in the selected status, and the
interfaces that can be added but have not been added to a zone are in the non-selected
status.
VLAN
If the interfaces added to the zone are Layer 2 Ethernet interfaces, you must specify the
range of the VLANs to be added to the zone. The VLANs cannot belong to any other
zone.
Return to Zone configuration task list.
Zone configuration example
Network requirements
• A company provides WWW and FTP services to the external network. You need to perform some
basic configurations for the zones to prepare for the configurations of the security policies.