R3204P16-HP Load Balancing Module Security Configuration Guide-6PW101

167
No. Attribute Descri
p
tion
40 Acct-Status-Type
Type of the Accounting-Request packet, which can be:
• 1: S t a r t
• 2: Stop
• 3: Interium-Update
• 4: Reset-Charge
• 7: Accounting-On (Defined in 3GPP, the 3rd Generation Partnership Project)
• 8: Accounting-Off (Defined in 3GPP)
• 9-14: Reserved for tunnel accounting
• 15: Reserved for failed
45 Acct-Authentic
Authentication method used by the user, which can be:
• 1: R A D I US
• 2: Local
• 3: Remote
60 CHAP-Challenge
CHAP challenge generated by the NAS for MD5 calculation during CHAP
authentication
61 NAS-Port-Type
Type of the physical port of the NAS that is authenticating the user, which can be:
• 15 : E t h e r n e t
• 16 : Any t ype o f A DSL
• 17: Cable (with cable for cable TV)
• 201: VLAN
• 202: ATM
If the port is an ATM or Ethernet one and VLANs are implemented on it, the value
of this attribute is 201.
79 EAP-Message
Used for encapsulating EAP packets to allow the NAS to authenticate dial-in
users via EAP without having to understand the EAP protocol
80
Message-Authentic
ator
Used for authentication and checking of authentication packets to prevent
spoofing Access-Requests. This attribute is used when RADIUS supports EAP
authentication.
87 NAS-Port-Id String for describing the port of the NAS that is authenticating the user
Proprietary RADIUS sub-attributes of HP
Table 39 Proprietary RADIUS sub-attributes of HP
No. Sub-attribute Descri
p
tion
1 Input-Peak-Rate Peak rate in the direction from the user to the NAS, in bps.
2 Input-Average-Rate Average rate in the direction from the user to the NAS, in bps.
3 Input-Basic-Rate Basic rate in the direction from the user to the NAS, in bps.
4 Output-Peak-Rate Peak rate in the direction from the NAS to the user, in bps.
5
Output-Average-Rat
e
Average rate in the direction from the NAS to the user, in bps.
6 Output-Basic-Rate Basic rate in the direction from the NAS to the user, in bps.