R3204P16-HP Load Balancing Module Security Configuration Guide-6PW101

182
To do... Use the command... Remarks
Add a URL address filtering
entry
firewall http url-filter host url-address { deny |
permit } url-address
Required
Display information about URL
address filtering
display firewall http url-filter host [ all | item
keywords | verbose ]
Optional
Configuring IP address-supported URL address filtering
Follow these steps to configure IP address-supported URL address filtering:
To do... Use the command...
Remarks
Enter system view system-view —
Enable the URL address filtering
function
firewall http url-filter host enable
Required
Disabled by default
Configure IP address-supported
URL address filtering
firewall http url-filter host
ip-address { deny | permit }
Optional
Deny by default
Specify an ACL for URL address
filtering
firewall http url-filter host acl
acl-number
Optional
By default, no ACL is specified for
URL address filtering.
Display information about URL
address filtering
display firewall http url-filter host
[ all | item keywords | verbose ]
Optional
NOTE:
The source IP addresses specified in the ACL for URL address filtering must be the IP addresses of the
w
ebsites allowed to be accessed by using their IP addresses.
Configuring URL parameter filtering
Follow these steps to configure URL parameter filtering:
To do... Use the command...
Remarks
Enter system view system-view —
Enable the URL parameter filtering
function
firewall http url-filter parameter enable
Required
Disabled by default
Add a URL parameter filtering
entry
firewall http url-filter parameter { default |
keywords keywords }
Required
Display information about URL
parameter filtering
display firewall http url-filter parameter [ all |
item keywords | verbose ]
Optional
Configuring Java blocking
Follow these steps to configure Java blocking:
To do... Use the command...
Remarks
Enter system view system-view —