R3204P16-HP Load Balancing Module Security Configuration Guide-6PW101

16
Configuration procedure
# Assign IP addresses to the interfaces. (Omitted)
# Enable the blacklist feature.
Select Security > Intrusion Detection from the navigation tree and then select the Blacklist tab to enter the
blacklist management page. Perform configuration as shown in Figure 17.
Figure 17 Enable the blacklist feature
• In the Global Configuration area, select the Enable Blacklist option.
• Click Apply.
# Add a blacklist entry for Host D.
In the Blacklist Configuration area, click Add and then perform configurations as shown in Figure 18.
Figure 18 Add a blacklist entry for Host D
• Enter IP address 5.5.5.5.
• Select the Permanence option.
• Click Apply to complete the configuration.
# Add a blacklist entry for Host C.
In the Blacklist Configuration area, click Add and then perform configurations as shown in Figure 19.