R3204P16-HP Load Balancing Module Security Configuration Guide-6PW101

45
• Select Trust from the Security Zone drop-down list.
• Select the Add protected IP entry to TCP Proxy check box in the Attack Prevention Policy area.
• Click Apply.
• In the SYN Flood Configuration area, click Add. Configure global settings as shown in Figure 51.
Figure 51 Configure global settings
• Select Global Configuration of Security Zone.
• Use the default values for the connection rate threshold and half connection count threshold.
• Click Apply.
Configuration guidelines
Follow these guidelines when configuring TCP proxy:
1. TCP proxy is effective only for incoming traffic of the security zone.
2. The performance of the web-based management system may be degraded if the system’s IP
address and port number are in the protected IP entry list.