R3204P16-HP Load Balancing Module Security Configuration Guide-6PW101

50
Figure 53 Time range configuration page
Table 22 Time range configuration items
Item Descri
p
tion
Name Type the name for the time range.
Periodic
Time
Range
Start Time
Set the start time of the periodic time range, in the hh:mm format (24-hour
clock).
End Time
Set the end time of the periodic time range, in the hh:mm format (24-hour
clock). The end time must be greater than the start time.
Sun., Mon., Tues.,
Wed., Thurs., Fri.,
and Sat.
Select the day or days of the week on which the periodic time range is
valid.
Absolute
Time
Range
From
Set the start time of the absolute time range. The time of the day is in the
hh:mm format (24-hour clock), and the date is in the MM/DD/YYYY
format.
To
Set the end time of the absolute time range. The time of the day is in the
hh:mm format (24-hour clock), and the date is in the MM/DD/YYYY
format. The end time must be greater than the start time.
Creating an ACL
After you select Security > ACL from the navigation tree, all existing ACLs are displayed in the right pane,
as shown in Figure 54. C
lick Add to enter the ACL configuration page, as shown in Figure 55.
Figure 54 ACL list