R3204P16-HP Load Balancing Module Security Configuration Guide-6PW101

55
Item Descri
p
tion
ToS Specify the ToS preference.
IMPORTANT:
If you configure the IP precedence or
ToS precedence in addition to the DSCP
priority, the DSCP priority takes effect.
Precedence Specify the IP precedence.
DSCP Specify the DSCP priority.
Return to ACL configuration task list.
Configuring an Ethernet frame header ACL rule
Select Security > ACL from the navigation tree. Then, select the Ethernet frame header ACL for which you
want to configure ACL rules from the ACL list in the right pane and click the corresponding icon in the
Operation column to list all existing rules of the ACL, as shown in Figure 60. C
lick Add to enter the
configuration page for Ethernet frame header ACL rules, as shown in Figure 61.
Figure 60 List of Ethernet frame h
eader ACL rules
Figure 61 Ethernet frame header ACL rule configuration page
Table 26 Ethernet frame header ACL rule configuration items
Item Descri
p
tion
Rule ID
Select the Rule ID check box and type a number for the rule.
If you do not specify the rule number, the system assigns one automatically.
IMPORTANT:
If the rule already exists, the configuration overwrites the old rule.