R3204P16-HP Load Balancing Module Security Configuration Guide-6PW101

82
• Click Apply.
# Create a PKI domain.
• Select Security > PKI > Domain from the navigation tree and then click Add to perform the
configurations shown in Figure 86.
Figure 86 Add a PKI do
main
• Type torsa as the PKI domain name.
• Type CA server as the CA identifier.
• Select aaa as the local entity.
• Select RA as the authority for certificate request.
• Type http://4.4.4.1:8080/certsrv/mscep/mscep.dll as the URL for certificate request. The URL must
be in the format of http://host:port/certsrv/mscep/mscep.dll, where host and port are the host
address and port number of the CA server.
• Select Manual as the certificate request mode.
• Click Apply. The system displays “Fingerprint of the root certificate not specified. No root certificate
validation will occur. Continue?” Click OK to confirm.
# Generate an RSA key pair.
• Select Security > PKI > Certificate from the navigation tree and then click Create Key to perform the
configurations shown in Figure 87.
Figure 87 Generate an
RSA key pair