R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

112
By default, the source IP address is the IP address of the output interface of the route to the server is used
as the source IP address..
If you use the tftp client source command to first configure a source interface and then a source IP address,
the source IP address overwrites the source interface, and vice versa.
If you first use the tftp client source command to specify a source IP address and then use the tftp
command to specify another source IP address, the latter is used.
The source IP address specified with the tftp client source command applies to all TFTP connections while
the one specified with the tftp command applies to the current TFTP connection only.
Related commands: display tftp client configuration.
Examples
# Specify the source IP address of packets sent a TFTP server as 2.2.2.2.
<Sysname> system-view
[Sysname] tftp client source ip 2.2.2.2
# Specify the IP address of interface GigabitEthernet 0/1 as the source IP address of packets sent to a
TFTP server.
<Sysname> system-view
[Sysname] tftp client source interface GigabitEthernet 0/1