R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

6
Table 2 Output description
Field Descri
p
tion
traceroute to 1.1.2.2(1.1.2.2)
Display the route the IP packets traverse from the current device to the
device whose IP address is 1.1.2.2.
hops max
Maximum number of hops of the probe packets, which can be set
through the -m keyword
bytes packet Number of bytes of a probe packet
press CTRL_C to break
During the execution of the command, you can press Ctrl+C to abort
the tracert operation.
1 1.1.1.2 673 ms 425 ms 30 ms
The probe result of the probe packets whose TTL is 1, including the IP
address of the first hop and the roundtrip time of three probe packets.
Number of packets that can be sent in each probe can be set through
the -q keyword.
System debugging commands
debugging
Syntax
debugging { all [ timeout time ] | module-name [ option ] }
undo debugging { all | module-name [ option ] }
View
User view
Default level
1: Monitor level
Parameters
all: All debugging functions.
timeout time: Specifies the timeout time for the debugging all command. When all debugging is enabled,
the system automatically executes the undo debugging all command after the time. The value ranges
from 1 to 1440, in minutes.
module-name: Module name, such as arp or device. To display the current module name, use the
debugging ? command.
option: The debugging option for a specific module. Different modules have different debugging options
in terms of their number and content. To display the currently supported options, use the debugging
module-name ? command.
Description
Use the debugging command to enable the debugging of a specific module.
Use the undo debugging command to disable the debugging of a specific module.
By default, debugging functions of all modules are disabled.