R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

7
Output of the debugging information may degrade system efficiency, so you should enable the
debugging of the corresponding module for diagnosing network failure, and not to enable debugging
of multiple modules at the same time.
Default level describes the default level of the debugging all command.
You must configure the debugging, terminal debugging and terminal monitor commands first to display
detailed debugging information on the terminal.
Related commands: display debugging.
Examples
# Enable IP packet debugging.
<Sysname> debugging ip packet
display debugging
Syntax
display debugging [ interface interface-type interface-number ] [ module-name ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the debugging settings of the specified interface,
where interface-type interface-number represents the interface type and number.
module-name: Module name.
Description
Use the display debugging command to display enabled debugging functions.
Related commands: debugging.
Examples
# Display all enabled debugging functions.
<Sysname> display debugging
IP packet debugging is on