R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

11
Field Descri
p
tion
Trap buffer:
enabled,max buffer size 1024, current buffer size
256,
current messages 216, dropped messages 0,
overwritten messages 0
channel number : 3, channel name : trapbuffer
Configurations on the trap buffer destination,
including whether information output to this
destination is enabled or disabled, the maximum
capacity, the current capacity, the current number of
messages, the number of dropped messages, the
number of messages that have been overwritten, and
the channel number and channel name used.
logfile:
channel number:9, channel name:channel9
Configurations on the log file destination, including
the channel number, and channel name used.
syslog:
channel number:6, channel name:channel6
Configurations on the Web interface destination,
including the channel number, and channel name
used.
Information timestamp setting
The time stamp configurations, specifying the time
stamp format for log, trap, debug, and log host
information.
display logbuffer
Syntax
display logbuffer [ reverse ] [ level severity | size buffersize ] * [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
reverse: Displays log entries chronologically, with the most recent entry at the top. If this keyword is not
specified, the log entries will be displayed chronologically, with the oldest entry at the top.
level severity: Displays information of the log with specified level, where severity represents information
level, which ranges from 0 to 7.
Table 6 Severity description
Severity Value Description
Corresponding keyword in
commands
Emergency 0 The system is unusable. emergencies
Alert 1
Action must be taken
immediately
alerts
Critical 2 Critical conditions critical
Error 3 Error conditions errors
Warning 4 Warning conditions warnings
Notice 5 Normal but significant condition notifications
Informational 6 Informational messages informational