R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

14
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display logfile buffer command to display contents of the log file buffer.
Note that all contents in the log file buffer will be cleared after they are successfully saved into the log file
automatically or manually.
Examples
# Display the contents of the log file buffer.
<Sysname> display logfile buffer
%@27091414#Aug 7 08:04:02:470 2009 Sysname IFNET/4/INTERFACE UPDOWN:
Trap 1.3.6.1.6.3.1.1.5.4<linkUp>: Interface 983040 is Up, ifAdminStatus is 1,
ifOperStatus is 1
The rest is omitted here.
display logfile summary
Syntax
display logfile summary
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display logfile summary command to display the configuration of the log file.
Examples
# Display the configuration of the log file.
<Sysname> display logfile summary
Log file is enabled.
Channel number : 9
Log file size quota : 10 MB
Log file directory : cf:/logfile
Writing frequency : 24 hour 0 min 10 sec