R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

19
Default level
2: System level
Parameters
None
Description
Use the info-center format unicom command to set the format of the system information sent to a log host
to UNICOM.
Use the undo info-center format command to restore the default.
By default, the format of the system information sent to a log host is HP.
The system information sent to a log host is in two formats: HP and UNICOM. For more information, see
System Maintenance Configuration Guide.
Examples
# Set the format of the system information sent to a log host to UNICOM.
<Sysname> system-view
[Sysname] info-center format unicom
info-center logbuffer
Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ] *
undo info-center logbuffer [ channel | size ]
View
System view
Default level
2: System level
Parameters
channel-number: A specified channel number, which ranges from 0 to 9.
channel-name: Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, see the info-center channel name command.
buffersize: Specifies the maximum number of log messages that can be stored in a log buffer. The value
ranges from 0 to 1024 and defaults to 512.
Description
Use the info-center logbuffer command to enable information output to a log buffer and set the
corresponding parameters.
Use the undo info-center logbuffer command to disable information output to a log buffer.
By default, information is output to the log buffer with the default channel of channel 4 (logbuffer) and the
default buffer size of 512.
Note that the info-center logbuffer command takes effect only after the information center is enabled
with the info-center enable command.