R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

20
Examples
# Configure the system to output information to the log buffer through channel 4, and set the log buffer
size to 50.
<Sysname> system-view
[Sysname] info-center logbuffer size 50
info-center logfile enable
Syntax
info-center logfile enable
undo info-center logfile enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the info-center logfile enable command to enable the output of system information to the log file.
Use the undo info-center logfile enable command to disable the output of system information to the log
file.
By default, the output of system information to the log file is enabled.
Examples
# Enable the log file feature.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
View
System view
Default level
2: System level
Parameters
freq-sec: Frequency with which the system saves the log file, which ranges from 1 to 86,400 seconds.
Description
Use the info-center logfile frequency command to configure the frequency with which the system saves
the log file.