R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

25
info-center snmp channel
Syntax
info-center snmp channel { channel-number | channel-name }
undo info-center snmp channel
View
System view
Default level
2: System level
Parameters
channel-number: Specifies a channel number, which ranges from 0 to 9.
channel-name: Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name.
Description
Use the info-center snmp channel command to configure the channel to output system information to the
SNMP module.
Use the undo info-center snmp channel command to restore the default channel to output system
information to the SNMP module.
By default, output of system information to the SNMP module is enabled with a default channel name of
snmpagent and a default channel number of 5.
Examples
# Output system information to the SNMP module through channel 6.
<Sysname> system-view
[Sysname] info-center snmp channel 6
info-center source
Syntax
info-center source { module-name | default } channel { channel-number | channel-name } [ debug { level
severity | state state } * | log { level severity | state state } * | trap { level severity | state state } * ] *
undo info-center source { module-name | default } channel { channel-number | channel-name }
View
System view
Default level
2: System level
Parameters
module-name: Specifies the output rules of the system information of the specified modules. For instance,
if information on ARP module is to be output, you can configure this argument as ARP. You can use the
info-center source ? command to view the modules supported by the device.
default: Specifies the output rules of the system information of all the modules allowed to output the
system information, including all the modules displayed by using the info-center source ? command.