R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

27
• You can configure to output the log, trap and debugging information to the SNMP module, but the
SNMP module only receives the trap information and discards the log and debugging information.
Table 11 Default output rules for different output destinations
Output
destinatio
n
Modules
allowed
LOG TRAP
DEBUG
Enabled/
disabled
Severity
Enabled/
disabled
Severity
Enabled/
disabled
Severity
Console
default (all
modules)
Enabled
Informatio
nal
Enabled Debug Enabled Debug
Monitor
terminal
default (all
modules)
Enabled
Informatio
nal
Enabled Debug Enabled Debug
Log host
default (all
modules)
Enabled
Informatio
nal
Enabled Debug Disabled Debug
Trap buffer
default (all
modules)
Disabled
Informatio
nal
Enabled
Informatio
nal
Disabled Debug
Log buffer
default (all
modules)
Enabled
Informatio
nal
Disabled Debug Disabled Debug
SNMP
module
default (all
modules)
Disabled Debug Enabled
Informatio
nal
Disabled Debug
Log file
default (all
modules)
Enabled Debug Enabled Debug Disabled Debug
Examples
# Set the output channel for the log information of VLAN module to snmpagent and to output information
with severity being emergency. Log information of other modules cannot be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel snmpagent log state off
[Sysname] info-center source vlan channel snmpagent log level emergencies state on
# Set the output channel for the log information of VLAN module to snmpagent and to output information
with severity being emergency. Log information of other modules and all the other system information
cannot be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel snmpagent debug state off log state off trap
state off
[Sysname] info-center source vlan channel snmpagent log level emergencies state on
info-center synchronous
Syntax
info-center synchronous
undo info-center synchronous
View
System view
Default level
2: System level