R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

38
Parameters
None
Description
Use the reset userlog flow export command to clear statistics about flow logs.
Related commands: display userlog export.
Examples
# Clear statistics about flow logs.
<Sysname> reset userlog flow export
reset userlog flow logbuffer
Syntax
reset userlog flow logbuffer
View
User view
Default level
2: System level
Parameters
None
Description
Use the reset userlog flow logbuffer command to clear flow logs in the cache.
Flow logs are saved in the cache before being exported to the information center or log server.
CAUTION:
Clearing flow logs in the cache causes the loss of lo
g
information, so you are recommended not to clear
the cache unless you are sure you want to clear it.
Examples
# Clear flow logs in the cache.
<Sysname> reset userlog flow logbuffer
userlog flow export host
Syntax
userlog flow export host ipv4-address udp-port
undo userlog flow export host ipv4-address
View
System view
Default level
2: System level