R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

40
Related commands: userlog flow export host.
Examples
# Configure the source IP address of flow logging packets as 1.2.1.2.
<Sysname> system-view
[Sysname] userlog flow export source-ip 1.2.1.2
userlog flow export version
Syntax
userlog flow export version version-number
undo userlog flow export version
View
System view
Default level
2: System level
Parameters
version-number: Flow logging version number. The value is either 1 or 3.
Description
Use the userlog flow export version command to configure the flow logging version.
Use the undo userlog flow export version command to restore the default.
By default, flow logging version is 1.0.
If you configure the flow logging version multiple times, the latest configuration will take effect. Although
a device supports both of the two versions, only one can be active at one time.
Examples
# Set the flow logging version to 3.0.
<Sysname> system-view
[Sysname] userlog flow export version 3
userlog flow syslog
Syntax
userlog flow syslog
undo userlog flow syslog
View
System view
Default level
2: System level
Parameters
None