R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

43
Field Descri
p
tion
Group name
SNMP group name.
• If a community name is created by using the snmp-agent community command,
the group name and the community name are the same, which means the
community name is displayed.
• If a community name is created by using the snmp-agent usm-user { v1 | v2c }
command, the name of the group to which the user belongs is displayed.
Acl
The number of the ACL in use.
After an ACL is configured, only the Network Management Station (NMS) with the
IP address that matches the ACL rule can access the device.
Storage-type
Storage type, which could be:
• volatile: Information is lost when the system is rebooted
• nonVolatile: Information is not lost when the system is rebooted
• permanent: Information is not lost when the system is rebooted. Modification is
permitted, but deletion is forbidden
• readOnly: Information is not lost when the system is rebooted. Read only, that is,
no modification, no deletion
• other: Other storage types
display snmp-agent group
Syntax
display snmp-agent group [ group-name ]
View
Any view
Default level
1: Monitor level
Parameters
group-name: Specifies the SNMP group name, which is a case sensitive string of 1 to 32 characters.
Description
Use the display snmp-agent group command to display information for the SNMPv3 group, including
group name, security model, MIB view, storage type, and so on. Absence of the group-name parameter
indicates that information for all groups is displayed.
Examples
# Display the information of all SNMP groups.
<Sysname> display snmp-agent group
Group name: groupv3
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonVolatile