R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

50
If a module can generate traps, its trap function status is enable; if not, disable. You can enable or
disable the trap function for a module at the command line interface (CLI).
display snmp-agent usm-user
Syntax
display snmp-agent usm-user [ engineid engineid | username user-name | group group-name ] *
View
Any view
Default level
1: Monitor level
Parameters
engineid engineid: Displays SNMPv3 user information for the SNMP engine ID identified by engineid.
When an SNMPv3 user is created, the system records the current local SNMP entity engine ID of the
device. If the engine ID is modified, the user becomes invalid and will become valid again if the engine
ID is restored.
username user-name: Displays SNMPv3 user information for a specified user name. It is case sensitive.
group group-name: Displays SNMPv3 user information for a specified SNMP group name. It is case
sensitive.
Description
Use the display snmp-agent usm-user command to display SNMPv3 user information.
Examples
# Display SNMPv3 information for all created users.
<Sysname> display snmp-agent usm-user
User name: userv3
Group name: mygroupv3
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
User name: userv3code
Group name: groupv3code
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
Table 18 Output description
Field Descri
p
tion
User name SNMP user name
Group name SNMP group name
Engine ID Engine ID for an SNMP entity