R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

60
View
System view
Default level
3: Manage level
Parameters
contact sys-contact: A string of 1 to 200 characters that describes the contact information for system
maintenance.
location sys-location: A string of 1 to 200 characters that describes the location of the device.
version: The SNMP version in use.
• all: Specifies SNMPv1, SNMPv2c, and SNMPv3.
• v1: SNMPv1.
• v2c: SNMPv2c.
• v3: SNMPv3.
Description
Use the snmp-agent sys-info command to configure system information, including the contact
information, the location, and the SNMP version in use.
Use the undo snmp-agent sys-info contact and undo snmp-agent sys-info location command to restore
the default.
Use the undo snmp-agent sys-info version command to disable use of the SNMP function of the specified
version.
By default, the location information is null, version is SNMPv3, and the contact is null.
Successful interaction between an NMS and the agents requires consistency of SNMP versions
configured on them.
Related commands: display snmp-agent sys-info.
NOTE:
Network maintenance engineers can use the system contact information to get in touch with the
manufacturer in case of network failures. The system location information is a management variable
under the system branch as defined in RFC 1213-MIB, identifying the location of the managed object.
Examples
# Configure the contact information as Dial System Operator at beeper # 27345.
<Sysname> system-view
[Sysname] snmp-agent sys-info contact Dial System Operator at beeper # 27345
snmp-agent target-host
Syntax
snmp-agent target-host trap address udp-domain ip-address [ udp-port port-number ] params
securityname security-string [ v1 | v2c | v3 [ authentication | privacy ] ]
undo snmp-agent target-host trap address udp-domain ip-address params securityname security-string