R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

75
Parameters
filename: Name of a batch file with a .bat extension. You can use the rename command to change the
suffix of the configuration file to .bat to use it as a batch file.
Description
Use the execute command to execute the specified batch file.
Batch files are command line files. Executing a batch file is to execute a set of command lines in the file.
Do not include invisible characters in a batch file. If an invisible character is found during the execution,
the batch process will abort and the commands that have been executed cannot be cancelled.
Not every command in a batch file is sure to be executed. For example, if a certain command is not
correctly configured, the command will fail to be executed, and the system omits this command and goes
to the next one.
The configuration generated after a batch file is executed will not be backed up to the standby main
board automatically.
Each configuration command in a batch file must be a standard configuration command, meaning that
the valid configuration information can be displayed with the display current-configuration command.
Examples
# Execute the batch file test.bat in the root directory.
<Sysname> system-view
[Sysname] execute test.bat
file prompt
Syntax
file prompt { alert | quiet }
View
System view
Default level
3: Manage level
Parameters
alert: Enables the system to warn you about operations that may bring undesirable results such as file
corruption or data loss.
quiet: Disables the system from warning you about any operation.
Description
Use the file prompt command to set a prompt mode for file operations.
By default, the prompt mode is alert, which is recommended to avoid mis-operations.
When the prompt mode is set to quiet, the system does not warn for any file operation.
Examples
# Set the file operation prompt mode to alert.
<Sysname> system-view
[Sysname] file prompt alert