R3204P16-HP Load Balancing Module System Maintenance Command Reference-6PW101

88
ftp server enable
Syntax
ftp server enable
undo ftp server
View
System view
Default level
3: Manage level
Parameters
None
Description
Use the ftp server enable command to enable the FTP server and allow the login of FTP users.
Use the undo ftp server command to disable the FTP server.
By default, the FTP server is disabled.
Examples
# Enable the FTP server.
<Sysname> system-view
[Sysname] ftp server enable
ftp timeout
Syntax
ftp timeout minute
undo ftp timeout
View
System view
Default level
3: Manage level
Parameters
minute: Idle-timeout timer in minutes, in the range 1 to 35791.
Description
Use the ftp timeout command to set the idle-timeout timer.
Use the undo ftp timeout command to restore the default.
By default, the FTP idle time is 30 minutes.
If an FTP connection is disrupted, the FTP server that is not notified will maintain the connection. With the
idle-timeout timer, the FTP server disconnects an FTP connection if no information is exchanged over the
connection before the timer expires.