R3204P16-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

10
Table 1 Severity description
Severity Severity value Description
Corresponding keyword
in commands
Emergency 0 The system is unusable.
emergencies
Alert 1
Action must be taken
immediately
alerts
Critical 2 Critical conditions critical
Error 3 Error conditions errors
Warning 4 Warning conditions warnings
Notice 5
Normal but significant
condition
notifications
Informational 6 Informational messages informational
Debug 7 Debug-level messages debugging
System information channels and output destinations
Table 2 shows the supported information channels and output destinations.
The system supports ten channels. By default, channels 0 through 6, and channel 9 are configured with
channel names, output rules, and are associated with output destinations. The channel names, output
rules and the associations between the channels and output destinations can be changed through
commands. Besides, you can configure channels 7, and 8 without changing the default configuration of
the eight channels.
Table 2 Information channels and output destinations
Information
channel number
Default channel
name
Default output
destination
Description
0 console Console
Receives log, trap and debugging
information.
1 monitor Monitor terminal
Receives log, trap and debugging
information, facilitating remote
maintenance.
2 loghost Log host
Receives log, trap and debugging
information and information will be
stored in files for future retrieval.
3 trapbuffer Trap buffer
Receives trap information, a buffer
inside the device for recording
information.
4 logbuffer Log buffer
Receives log and debugging
information, a buffer inside the
device for recording information.
5 snmpagent SNMP module Receives trap information.
6 channel6 Web interface Receives log information.
7 channel7 Not specified
Receives log, trap, and debugging
information.