R3204P16-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

14
%% (vendor ID)
This field indicates that the information is generated by an HP device. It is displayed only when the system
information is sent to a log host in the format of HP.
vv
This field is a version identifier of syslog, with a value of 10. It is displayed only when the output
destination is log host.
module
The module field represents the name of the module that generates system information. You can enter the
info-center source ? command in system view to view the module list.
level (severity)
System information can be divided into eight levels based on its severity, from 0 to 7. See Table 1 for
definition and description of these severity levels. The levels of system information generated by modules
are predefined by developers, and you cannot change the system information levels. However, with the
info-center source command, you can configure to output information of the specified level and not to
output information lower than the specified level.
digest
The digest field is a string of up to 32 characters, outlining the system information.
For system information destined to the log host:
• If the character string ends with (l), the information is log information
• If the character string ends with (t), the information is trap information
• If the character string ends with (d), the information is debugging information
For system information destined to other destinations:
• If the time stamp starts with a %, the information is log information
• If the time stamp starts with a #, the information is trap information
• If the time stamp starts with a *, the information is debugging information
serial number
This field indicates the serial number of the device that generates the system information. It is displayed
only when the system information is sent to a log host in the format of UNICOM.
source
This field indicates the source of the information. It is displayed only when the system information is sent
to a log host in the format of HP.
content
This field provides the content of the system information.
Configuring information center
Information center configuration task list
Complete the following tasks to configure information center: