R3204P16-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

15
Task Remarks
Outputting system information to the console Optional
Outputting system information to a monitor terminal Optional
Outputting system information to a log host Optional
Outputting system information to the trap buffer Optional
Outputting system information to the log buffer Optional
Outputting system information to the SNMP module Optional
Outputting system information to the web interface Optional
Saving system information to a log file Optional
Configuring synchronous information output Optional
Outputting system information to the console
Outputting system information to the console
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel channel-number
name channel-name
Optional
See Table 2 for default channel names.
Configure the channel
through which system
information can be output
to the console
info-center console channel
{ channel-number | channel-name }
Optional
By default, system information is output
to the console through channel 0
(known as console).
Configure the output rules
of system information
info-center source { module-name |
default } channel { channel-number |
channel-name } [ debug { level severity
| state state } * | log { level severity |
state state } * | trap { level severity |
state state } * ] *
Optional
See “Default output rules of system
informa
tion.”
Configure the format of the
time stamp
info-center timestamp { debugging |
log | trap } { boot | date | none }
Optional
The time stamp format for log, trap and
debugging information is date by
default.
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the console: