R3204P16-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

Item Descri

tion

Flow Information

Displays the flow information.

• If the protocol type is TCP or UDP, the displayed flow information is source IP

address:source port-->destination IP address:destination port, for example,

1.1.1. 2 :10 26 - - > 1.1. 2.10 : 69.

• If the protocol type is ICMP, the displayed flow information is source IP

address-->destination IP address,ICMP type (ICMP code), for example,

1.1.1. 2- - > 1.1. 2.10 , e ch o ( 8 ) .

• If the protocol type is another type except these three, the displayed flow

information is source IP address-->destination IP address, for example,

1.1.1. 2 - - > 1.1. 2 .10 .

Displaying user logs

NOTE:

To display user logs on the web interface, configure outputting user logs to the information center.

Displaying flow logs:

Select Log Report > Report > Flow Log from the navigation tree to enter the page for displaying flow logs.

If you select the 1.0 radio box, the flow logging information will be displayed, as shown in Figure 21. If

u select the 3.0 radio box, the flow logging 3.0 information will be displayed, as shown in Figure 22.

Figure 21 Flow logging

1.0 log report