R3204P16-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

53
To do… Use the command… Remarks
Configure the source address
for traps
snmp-agent trap source interface-type
{ interface-number |
interface-number.subnumber }
Optional
Extend the standard
linkUp/linkDown traps
defined in RFC
snmp-agent trap if-mib link extended
Optional
Standard linkUp/linkDown traps
defined in RFC are used by default.
Configure the size of the trap
send queue
snmp-agent trap queue-size size
Optional
100 by default
Configure the holding time of
the traps in the queue
snmp-agent trap life seconds
Optional
120 seconds by default
NOTE:
A
n extended linkUp/linkDown trap is the standard linkUp/linkDown trap (defined in RFC) appended with
interface description and interface type information. If the extended messages are not supported on the
NMS, disable this function to let the device send standard linkUp/linkDown traps.
Displaying and maintaining SNMP
To do… Use the command… Remarks
Display SNMP agent system
information, including the contact,
location, and version of the SNMP
display snmp-agent sys-info [ contact | location
| version ]*
Available in any view
Display SNMP agent statistics display snmp-agent statistics Available in any view
Display the SNMP agent engine ID display snmp-agent local-engineid Available in any view
Display SNMP group information display snmp-agent group [ group-name ] Available in any view
Display basic information of the
trap queue
display snmp-agent trap queue Available in any view
Display the modules that can send
traps and whether their trap
sending is enabled or not
display snmp-agent trap-list Available in any view
Display SNMPv3 agent user
information
display snmp-agent usm-user [ engineid
engineid | username user-name | group
group-name ] *
Available in any view
Display SNMPv1 or SNMPv2c
agent community information
display snmp-agent community [ read | write ] Available in any view
Display MIB view information for
an SNMP agent
display snmp-agent mib-view [ exclude |
include | viewname view-name ]
Available in any view