R3204P16-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

[Sysname] snmp-agent log get-operation

[Sysname] snmp-agent log set-operation

• The following log information is displayed on the terminal when the NMS performs the Get

operation to the agent.

%Jan 1 02:49:40:566 2006 Sysname SNMP/6/GET:

seqNO = <10> srcIP = <1.1.1.2> op = <get> node = <sysName(1.3.6.1.2.1.1.5.0)> value=<>

• The following log information is displayed on the terminal when the NMS performs the Set

operation to the agent.

%Jan 1 02:59:42:576 2006 Sysname SNMP/6/SET:

seqNO = <11> srcIP = <1.1.1.2> op = <set> errorIndex = <0> errorStatus =<noError> node

= <sysName(1.3.6.1.2.1.1.5.0)> value = <Sysname>

Table 18 Description of the output field of SNMP log

Field Descri

tion

Jan 1 02:49:40:566 2006 The time when the SNMP log is generated

seqNO

Serial number of the SNMP log (The system numbers the recorded SNMP logs

automatically; the serial number starts from 0)

srcIP IP address of the NMS

op SNMP operation type (GET or SET)

node Node name of the SNMP operations and OID of the instance

erroIndex Error index, with 0 meaning no error

errorStatus Error status, with noError meaning no error

value

Value set when the SET operation is performed (This field is null, meaning the

value obtained with the GET operation is not logged.)

When the value is a string of characters and the string contains characters not

in the range of ASCII 0 to 127 or invisible characters, the string is displayed in

hexadecimal. For example, value = <81-43>[hex]

NOTE:

The system information of the information center can be output to the terminal or to the lo

buffer. In this

example, SNMP logs are output to the terminal. For configuration of SNMP log output to other

destinations, see the chapter “Information center configuration.”