R3204P16-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

70
Using another username to log in to the FTP server
After the LB module serving as the FTP client has established a connection with the FTP server, you can
use another username to log in to the FTP server. For more information about establishing an FTP
connection, see “Establishing an FTP connection.”
This feature allows you to switch to different user levels without affecting the current FTP connection; if you
input an incorrect username or password, the current connection will be terminated, and you must log in
again to access the FTP server.
Follow the step to use another username to log in to the FTP server:
To do… Use the command…
Remarks
Use another username to re-log in after
successfully logging in to the FTP server
user username [ password ] Optional
Maintaining and debugging the FTP connection
After the LB module serving as the FTP client has established a connection with the FTP server, you can
perform the following operations to locate and diagnose FTP connection problems. For more information
about establishing an FTP connection, see “Establishing an FTP connection.”
To do… Use the command…
Remarks
Display the help information of FTP-related
commands supported by the remote FTP server
remotehelp
[ protocol-command ]
Optional
Enable information display in a detailed manner verbose
Optional
Enabled by default
Enable FTP related debugging when the LB
module acts as the FTP client
debugging
Optional
Disabled by default
Terminating an FTP connection
After the LB module serving as the FTP client has established a connection with the FTP server, you can
use any of the following commands to terminate the FTP connection. For more information about
establishing an FTP connection, see “Establishing an FTP connection.”
To do… Use the command…
Remarks
Terminate the connection to the FTP
server without exiting FTP client view
disconnect
Optional
Equal to the close command.
Terminate the connection to the FTP
server without exiting FTP client view
close
Optional
Equal to the disconnect command.
Terminate the connection to the FTP
server and return to user view
bye
Optional
Equal to the quit command in FTP client
view.
Terminate the connection to the FTP
server and return to user view
quit
Optional
Available in FTP client view, equal to
the bye command.