R3204P16-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

CAUTION:

If the available memory space of the LB module is not enough, use the fixdisk command to clear the

memory or use the delete /unreserved

file

url

command to delete the files not in use and then perform the

following operations.

# Download application file newest.bin from PC.

<Sysname> tftp 1.2.1.1 get newest.bin

# Upload a configuration file config.cfg to the TFTP server.

<Sysname> tftp 1.2.1.1 put config.cfg configback.cfg

# Specify newest.bin as the main boot file to be used at the next startup.

<Sysname> boot-loader file newest.bin main

# Reboot LB module and the software is upgraded.

<Sysname> reboot

CAUTION:

The boot file used for the next startup must be saved under the root directory of the storage medium (For

a device that has been partitioned, the boot file must be saved on the first partition). You can copy or move

a file to the root directory of the storage medium. For more information about the boot-loader command,

see

System Management Command Reference.