R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

106
display current-configuration
Syntax
display current-configuration [ [ configuration [ configuration ] | interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ | { begin | exclude | include } regular-expression ] ]
View
Any view
Default level
2: System level
Parameters
configuration [ configuration ]: Displays non-interface configuration. If no argument is used, all the
non-interface configuration is displayed; if parameters are used, display the specified information. For
example:
• acl-adv: Displays advanced ACLs.
• isp: Displays the ISP configuration.
• luser: Displays local user configuration.
• post-system: Displays the post-system configuration.
• system: Displays the system configuration.
• timerrange: Displays timer ranges.
• ugroup: Displays user group configuration.
• user-interface: Displays the user interface configuration.
interface [ interface-type ] [ interface-number ]: Displays the interface configuration, where interface-type
represents the interface type and interface-number represents the interface number.
by-linenum: Displays the number of each line.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display current-configuration command to display the current configuration of the device.
A parameter is not displayed if it adopts the default setting. If the validated parameter is changed,
although you have configured it, the validated parameter is displayed. For example, IP address 11.11.11.11
24 has been configured on a Loopback interface. If you execute the display current-configuration
command, IP address 11.11.11.11 255.255.255.255 is displayed, meaning the validated subnet mask is
32 bits.
Related commands: display saved-configuration, reset saved-configuration, and save.
Examples
# Display the current configuration of the device.