R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

107
<Sysname> display current-configuration
display default-configuration
Syntax
display default-configuration
View
Any view
Default level
2: System level
Parameters
None
Description
Use the display default-configuration command to display the factory defaults of the device. The
command displays all commands to be executed when the device boots with the factory defaults.
Related commands: display current-configuration and display saved-configuration.
Examples
# Display the factory defaults of the device.
<Sysname> display default-configuration
display saved-configuration
Syntax
display saved-configuration [ by-linenum ]
View
Any view
Default level
2: System level
Parameters
by-linenum: Identifies each line of displayed information with a line number.
Description
Use the display saved-configuration command to display the contents of the configuration file saved for
the next startup of the device.
During device management and maintenance, you can use this command to check whether important
configurations are saved to the configuration file to be used at the next startup of the device.
If the system is not specified with a configuration file to the used at the next startup or the specified
configuration file does not exist, the display saved-configuration command displays the default
configuration file of the device. If the default configuration file does not exist, the system prompts “The
config file does not exist!”.
Related commands: display current-configuration, reset saved-configuration, and save .