R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

13
# Enter a. The task terminates immediately and the system returns to system view.
--- 192.168.1.49 ping statistics ---
2 packet(s) transmitted
2 packet(s) received
0.00% packet loss
round-trip min/avg/max = 3/3/3 ms
<Sysname>
flow-control
Syntax
flow-control { hardware | none | software }
undo flow-control
View
User interface view
Default level
2: System level
Parameters
hardware: Performs hardware flow control.
none: Disables flow control.
software: Performs software flow control.
Description
Use the flow-control command to configure the flow control mode.
Use the undo flow-control command to restore the default.
The default settings of this command vary with devices.
NOTE:
The command is only applicable to asynchronous serial interfaces (including AUX and console ports).
Examples
# Configure not to perform flow control in the console 0 user interface.
<Sysname> system-view
[Sysname] user-interface console 0
[Sysname-ui-console0] flow-control none
history-command max-size
Syntax
history-command max-size size-value
undo history-command max-size