R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

33
<Sysname> oap connect slot 3
Press CTRL+K to quit.
Connected to OAP!
oap management-ip
Syntax
oap management-ip ip-address slot slot-number
undo oap management-ip slot slot-number
View
System view
Default level
2: System level
Parameters
slot slot-number: Specifies the number of the slot where an OAP system resides.
Description
Use the oap management-ip command to configure the management IP address of an OAP module.
Use the undo oap management-ip command to restore the default.
By default, the management IP address of an OAP module is not configured.
When you use network management station (NMS) to manage an OAP module, you must first configure
the management IP address of the OAP module.
Examples
# Configure the management IP address of the OAP module in slot 3 as 1.1.1.1.
<Sysname> System-view
[Sysname] oap management-ip 1.1.1.1 slot 3
oap reboot
Syntax
oap reboot slot slot-number
View
User view
Default level
2: System level
Parameters
slot slot-number: Specifies the number of the slot where an OAP system resides.
Description
Use the oap reboot slot command to reset the system on an OAP module.
Examples
# Reset the system on the OAP module in slot 3.