R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

34
<Sysname> oap reboot slot 3
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down!
Continue? [Y/N]:y
Reboot OAP by command.
ACSEI server configuration commands
acsei client close
Syntax
acsei client close client-id
View
ACSEI server view
Default level
2: System level
Parameters
client-id: ID of the ACSEI client to be closed, which ranges from 1 to 12. An ACSEI client ID is assigned
by the ACSEI server.
Description
Use the acsei client close command to close the specified ACSEI client.
Examples
# Close ACSEI client 1.
<Sysname> system-view
[Sysname] acsei server
[Sysname-acsei-server] acsei client close 1
acsei client reboot
Syntax
acsei client reboot client-id
View
ACSEI server view
Default level
2: System level
Parameters
client-id: ID of the ACSEI client to be restarted, which ranges from 1 to 12.
Description
Use the acsei client reboot command to restart the specified ACSEI client.
Examples
# Restart ACSEI client 1.