R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

37
Use the undo acsei timer monitor command to restore the default.
By default, the monitoring timer is set to 5 seconds.
Examples
# Set the monitor timer for ACSEI server to monitor ACSEI client to 6 seconds.
<Sysname> system-view
[Sysname] acsei server
[Sysname-acsei-server] acsei timer monitor 6
display acsei client info
Syntax
display acsei client info [ client-id ]
View
Any view
Default level
1: Monitor level
Parameters
client-id: ID of an ACSEI client, which ranges from 1 to 12.
Description
Use the display acsei client info command to display the ACSEI client information. The client information
is retrieved from the advertisement packet sent by the client, so that when there is no ACSEI client
information, the command displays the information keywords only.
If executed without the client-id argument, the command displays information about all the ACSEI clients
in order of registration time.
Examples
# Display information about ACSEI client 1.
<Sysname> display acsei client info 1
Total Client Number: 1
Client ID: 1
Client Description: SecBlade LB
Hardware: A.0
System Software: COMWAREV500R002B77D514
Application Software: V300R002B01D514
CPU: RMI XLR732 1000MHz
PCB Version: A.0
CPLD Version: 3.0
Bootrom Version: Basic BootRom Version:1.28,Extend BootRom Version:1.38
CF card: 247M Bytes Compact Flash Storage Device
Memory: 2048M Bytes DDR2 SDRAM Memory
Harddisk:
# Display information about all ACSEI clients.
<Sysname> display acsei client info
Total Client Number: 1