R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

46
clock timezone
Syntax
clock timezone zone-name { add | minus } zone-offset
undo clock timezone
View
System view
Default level
3: Manage level
Parameters
zone-name: Time zone name, a case-sensitive string of 1 to 32 characters.
add: Adds a specified offset to UTC time.
minus: Subtracts a specified offset to UTC time.
zone-offset: Offset to the UTC time, in the hh:mm:ss format. Zeros can be omitted, unless you specify
00:00:00.
Description
Use the clock timezone command to set the local time zone.
Use the undo clock timezone command to restore the local time zone to the default UTC time zone.
By default, the local time zone is UTC zone.
NOTE:
To view the result after the configuration takes effect, use the display clock command. The time displayed
in the log or debug information is the specified local time zone.
Related commands: clock datetime, clock summer-time one-off, clock summer-time repeating, and
display clock.
Examples
# Set the name of the local time zone to Z5, five hours ahead of UTC time.
<Sysname> system-view
[Sysname] clock timezone z5 add 5
display clock
Syntax
display clock
View
Any view
Default level
1: Monitor level
Parameters
None