R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

Device management commands

NOTE:

Many types of storage media are available, such as compact Flash (CF) and universal serial bus (USB)

disk. CF is exemplified in this document.

configure-user count

Syntax

configure-user count number

undo configure-user count

View

System view

Default level

2: System level

Parameters

number: Number of users, which ranges from 1 to 55.

Description

Use the configure-user count command to configure the number of users allowed to enter system view at

the same time.

Use the undo configure-user count command to restore the default.

Two users are allowed to configure in system view by default.

Related commands: display configure-user.

NOTE:

• When multiple users enter system view to confi

ure certain attribute, only the last confi

uration applies.

• When the number of users has already reached the limit, other users can not enter system view.

Examples

# Configure the limit of users as 4.

<Sysname> system-view

[Sysname] configure-user count 4

Syntax