R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

60
Default level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays main parameters of the pluggable transceiver
plugged in the specified interface. interface-type interface-number represents interface type and
interface number. If it is not specified, the command displays main parameters of the pluggable
transceivers in all the interfaces.
Description
Use the display transceiver command to display main parameters of a single or all pluggable
transceivers.
Examples
# Display main parameters of the pluggable transceiver plugged in interface GigabitEthernet 0/4.
<Sysname> display transceiver interface GigabitEthernet 0/4
display transceiver alarm
Syntax
display transceiver alarm interface [ interface-type interface-number ]
View
Any view
Default level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays the current alarm information of the pluggable
transceiver plugged in the specified interface. interface-type interface-number represents interface type
and interface number. If it is not specified, the command displays the current alarm information of the
pluggable transceiver in all the interfaces.
Description
Use the display transceiver alarm command to display the current alarm information of a single or all
transceivers.
If no error occurs, None is displayed.
Table 14 sh
ows the alarm information that might occur to the commonly used transceivers.
Table 14 Output description
Field Remarks
GBIC/SFP
RX loss of signal Incoming (RX) signal is lost.
RX power high Incoming (RX) power level is high.
RX power low Incoming (RX) power level is low.
TX fault Transmit (TX) fault
TX bias high TX bias current is high.