R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

69
Examples
# Set the exception handling method to reboot.
<Sysname> system-view
[Sysname] system-failure reboot
temperature-limit (basic)
Syntax
temperature-limit slot-number lower-value upper-value
undo temperature-limit slot-number
View
System view
Default level
2: System level
Parameters
slot-number: This argument is invalid.
lower-value: Lower temperature limit in Celsius degrees.
upper-value: Upper temperature limit in Celsius degrees. The upper-value argument must be larger than
the lower-value argument.
Description
Use the temperature-limit command to set the temperature alarm threshold on a card.
Use the undo temperature-limit command to restore the temperature alarm threshold to the default.
By default, the temperature alarm threshold is 50°C (122°F).
Examples
# Set the lower temperature limit on card 1 to 10°C (50°F) and the upper temperature limit to 45°C
(113 ° F ) .
<Sysname> system-view
[Sysname] temperature-limit 1 10 45
Setting temperature limit succeeded.
time at
Syntax
time time-id { one-off | repeating } at time [ month-date month-day | week-day week-daylist ] command
command
time time-id at time date command command
undo time time-id
View
Job view
Default level
3: Manage level