R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

77
Unified multi-system management
configuration commands
unified-management vlan
Syntax
unified-management vlan vlan-id
undo unified-management vlan
View
System view
Default level
2: System level
Parameters
vlan-id: ID of the unified management VLAN, which ranges from 1 to 4094.
Description
Use the unified-management vlan command to configure the unified management VLAN.
Use the undo unified-management vlan command to remove the unified management VLAN.
By default, no unified management VLAN is configured.
The unified management VLAN must be a VLAN that has not been created.
The systems to be managed uniformly must be configured with the same management VLAN.
Examples
# Configure unified management VLAN 2.
<Sysname> system-view
[Sysname] unified-management vlan 2