R3204P16-HP Load Balancing Module System Management Command Reference-6PW101
79
Field Descri
p
tion
poll
Poll interval in seconds, namely, the maximum interval between successive NTP
messages.
now
The length of time from when the last NTP message was received or when the local
clock was last updated to the current time
The time is in seconds by default. If the time length is greater than 2048 seconds, it is
displayed in minutes; if greater than 300 minutes, in hours; if greater than 96 hours,
in days.
offset The offset of the system clock relative to the reference clock, in milliseconds
delay The roundtrip delay from the local device to the clock source, in milliseconds
disper The maximum error of the system clock relative to the reference source.
[12345]
• 1: Clock source selected by the system, namely, the current reference source, with a
system clock stratum level less than or equal to 15.
• 2: Stratum level of the clock source is less than or equal to 15.
• 3: This clock source has survived the clock selection algorithm.
• 4: This clock source is a candidate clock source.
• 5: This clock source was created by a configuration command.
Total associations Total number of associations
# View the detailed information about all NTP sessions.
<Sysname> display ntp-service sessions verbose
clock source: 127.127.1.0
clock stratum: 3
clock status: configured, master, sane, valid
reference clock ID: 127.127.1.0
local mode: client, local poll: 6
peer mode: server, peer poll: 6
offset: 0.0000 ms,delay: 0.00 ms, disper: 0.02 ms
root delay: 0.00 ms, root disper: 10.00 ms
reach: 1, sync dist: 0.010, sync state: 2
precision: 2^18, version: 3, peer interface: InLoopBack0
reftime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71484513)
orgtime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71484513)
rcvtime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.7149E881)
xmttime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71464DC2)
filter delay : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filter offset: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filter disper: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
reference clock status: working abnormally
timecode:
Total associations : 1
Table 19 Output description
Field Descri
p
tion
clock source IP address of the clock source